The processing takes place by pouring a mixture of water and clay into a plaster mould. The plaster absorbs the water and with it also the clay, in a natural process that has been handed down for centuries in the Novese area. The clay, solidifying on the inner wall of the mould, allows to obtain a thickness whose dimensions depend on the absorption time. When the thickness is adequate, in significant times, the excess clay is emptied from the mould, inside which a shaped and empty product remains, ready to receive the light.
Wall lamp with a rectangular and slightly oblique shape. It develops along the short side, and whose lower part remains close to the wall, while the upper part is detached, allowing the excellent light created by the LEDs to escape.
Corner wall lighting with LED lights with direct upward light. Characterized by a pyramidal shape, the light is projected directly upwards, the peculiarity of the corner installation allows to complete the lighting even in the areas usually left dark of the house.
Wall sconce with LED electric part with biemission light. Characterized by a hollow triangle shape, the light comes from inside the geometric figure directly upwards and downwards, giving a suffused atmosphere suitable for any setting.
Wall sconce with LED electrical part with minimal design with bi-emission light. It looks like a sheet of pastry folded slightly in half from the ends of which light flows both upwards and downwards. Suitable for settings of any type thanks to its simplicity.
Wall lighting with LED electrical part with biemission light. The light escapes from a parallelepiped pointing directly up and down. This element adapts perfectly to modern environments thanks to its simplicity.
Angular wall lighting with LED lights with biemission light. Characterized by a rounded shape, the light is projected directly upwards and downwards, the peculiarity of the corner installation allows you to complete the lighting.
Wall sconce with electrical LED wall light with biemission light. The decorative profile recalls an empty double crescent with rounded lines from which a soft light escapes from the inside, both upwards and downwards, making it suitable for modern and sophisticated settings.
Wall lamp with LED electrical part with a sinuous and innovative shape. Reminiscent of a protruding piece of wall, with light escaping from the top and bottom, and two corners creating a harmonious symmetry.
Wall lamp in CRISTALY® with LED electrical part with a modern design. It looks like a sheet with a slight inclination in its long sides, which allows the light to escape. From the design of Matteo Beraldi.
Wall sconce with LED electrical part with modern design with bi-emission light. Characterized by a circular figure, it has soft and rounded lines. The light is projected directly upwards and downwards. Suitable for modern and refined environments.
Separate CRISTALY® lighting with LED electric wall with bi-emission light with a modern design. The light comes out of a parallelepiped equipped with an opal screen. This element adapts perfectly to modern environments thanks to its simplicity.